Avaya Business Secure Router 222 Configuration - Basics Bedienungsanleitung PDF herunterladen (Seite 118)

100

101

118 Chapter 7 WAN screens

NN47922-500

Configuring WAN MAC

To change the WAN MAC settings of your Business Secure Router, click WAN ,

then the WAN MAC tab. The screen appears as shown in Figure 28.

Figure 28 MAC Setup

Allow between

WAN and LAN

Select this check box to forward NetBIOS packets from the LAN to

the WAN and from the WAN to the LAN. If your firewall is enabled

with the default policy set to block WAN to LAN traffic, you must

also enable the default WAN to LAN firewall rule that forwards

NetBIOS traffic.

Clear this check box to block all NetBIOS packets going from the

LAN to the WAN and from the WAN to the LAN.

This field does the same as the Allow between LAN and WAN

field in the LAN IP screen. Enabling one automatically enables the

other.

Allow Trigger Dial Select this option to allow NetBIOS packets to initiate calls.

Apply Click Apply to save your changes to the Business Secure Router.

Reset Click Reset to begin configuring this screen afresh.

Table 22 WAN: IP

Label Description

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 450 451

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Business Secure Router 222 Configuration - Basics Bedienungsanleitung Seite 118

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Avaya Business Secure Router 222 Configuration - Basics