Avaya Configuring BayStack Remote Access Bedienungsanleitung Seite 64

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 168
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 63
Configuring BayStack Remote Access
3-10 117341-A Rev. A
Configuring a Netboot or Directed Netboot Interface
You can use Site Manager to configure a Netboot or Directed Netboot interface.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose Global Protocols. The Global Protocols menu opens.
3. Choose Net Boot. The Net Boot menu opens.
4. Choose Interfaces. The Netboot Interfaces window opens.
5. In the scroll box, choose the interface you
want to configure.
The window shows the parameter values
for that interface.
6. Set the following parameters:
Connector IP Address
Connector Subnet Mask
Connector Next Hop
Connector Protocol Mask
Connector State
Click on Help or refer to the parameter
descriptions beginning on page A-4.
7. Click on Apply, then click on Done. You return to the Configuration Manager
window.
Note: If you configure more than one interface to Netboot, the first interface to
receive a reply from the BootP server will complete the Netboot process.
Seitenansicht 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 167 168

Kommentare zu diesen Handbüchern

Keine Kommentare