Avaya FRE-2 Bedienungsanleitung PDF herunterladen (Seite 34)

Upgrading the FRE-2 Processor Module

12 108305 Rev. D

6. Repeat Steps 3 through 5 to install the other 72-pin SIMMs in sockets

SI 1, SI 2, and SI 4.

7. Install the 30-pin SIMM in socket U85, using the same installation

method described in Steps 3 through 5.

When you are ﬁnished, sockets SI 1 through SI 4 and socket U85 are populated.

Proceed to “Attaching the Upgrade Label.”

Upgrading from 32 MB to 64 MB (FRE-2/060 Only)

If you are upgrading a FRE-2/060 processor module from 32 MB to 64 MB, your

upgrade kit contains two identical 72-pin SIMMs.

To upgrade the FRE-2/060 processor module to 64 MB:

1. Using Figure 7 as a reference, locate SIMM sockets SI 1 and SI 2 on your

FRE-2 processor module.

Sockets SI 1 and SI 2 should be empty.

2. Holding one of the new SIMMs by its edges, turn it so the keyed (notched)

side faces the center of socket SI 1 (refer to Figure 8).

3. Insert the SIMM into the socket at an angle of about 30 degrees from the

vertical.

4. Gently push down on the module so that the retainers grasp the SIMM,

locking it into place (refer to Figure 9).

When the SIMM is properly inserted, the two tiny vertical black poles on the

SIMM socket should line up with the two holes in the SIMM.

5. Repeat Steps 2 through 4 to install the other SIMM in socket SI 2.

When you are ﬁnished, sockets SI 1, SI 2, SI 3, SI 4, and U85 are all populated.

Proceed to “Attaching the Upgrade Label.”

1 2 ... 29 30 31 32 33 34 35 36

Keine Kommentare

Avaya FRE-2 Bedienungsanleitung Seite 34