Avaya FRE-2 Bedienungsanleitung PDF herunterladen (Seite 35)

Upgrading the FRE-2 Processor Module

108305 Rev. D 13

Attaching the Upgrade Label

Your upgrade kit comes with three labels: 16MB Upgrade, 32MB Upgrade, and

64MB Upgrade, Before you reinstall the FRE-2 processor module in the router,

apply the appropriate label to the FRE-2 processor module extractor that does not

already have a label on it. Be sure to attach the label that shows the amount of

memory you now have on your FRE-2 processor module. To apply the label,

remove it from the paper backing and press it into place.

Reinstalling the FRE-2 Processor Module

After you upgrade the FRE-2 processor module, reinstall it in the router’s slot as

follows:

1. Holding the board extractors on the FRE-2 processor module open, slide

the FRE-2 processor module into the card guide.

You cannot install the FRE-2 processor module in Slot 1 of the BLN

BLN-2 router, or in Slot 7 of the BCN router. These slots are reserved for a

system resource module.

2. Push the board forward gently; ensure that the connector in the middle

engages.

3. Push the extractors forward to lock the board in place.

When you insert a FRE-2 processor module into a slot and the router determines

that power is stable for the slot, the FRE-2 processor module automatically resets

as follows:

1. It executes the diagnostics image resident on the onboard Flash memory.

2. It completes the boot process.

Reassembling the Router

After you reinstall the FRE-2 processor module, reassemble the router as follows:

Note: Slide the board out and repeat Steps 1 through 3 if the extractors do not

lock into place easily.

1 2 ... 30 31 32 33 34 35 36

Keine Kommentare

Avaya FRE-2 Bedienungsanleitung Seite 35