
Quick-Starting Routers
3-8
308654-14.00 Rev 00
Figure 3-2. Network Example for the Quick-Start ATM Worksheet
Workstation where you will manage
the router remotely, using Site Manager
or another configuration tool.
IP address = 192.32.10.12
Corporate IP network
QS0016A
ATM network
The console port
connector is in
slot 1 of a BLN or ASN
or in slot 7 of a BCN.
Local Nortel Networks router
connects to an ATM network from
the ATM Routing Engine link module
in slot 2 using an ATMC-OC3MM connector.
You configure a service record type using the
script and then run IP over the connection.
IP address = 192.168.125.34
Subnet mask = 255.255.255.0
Connect a PC or
ASCll console locally
to the router to access
the Technician Interface
and run the installation
script,
install.bat.
Remote Nortel Networks
edge device (for example,
a router or switch) on the
ATM network with a connection
to the IP network containing
the workstation that you will
use to manage the router
you are configuring.
Kommentare zu diesen Handbüchern