Avaya Configuring ATM Half-Bridge Services Bedienungsanleitung PDF herunterladen (Seite 79)

AHB, BootP/DHCP, IP, and ATM Parameter Descriptions

300017-A Rev. 00

A-23

ATM Virtual Channel Link Parameter Descriptions

Note:

ATM does not allow duplicate VPI/VCI pairs on the same physical

interface. However, duplicate VPI/VCI pairs can exist on different physical

interfaces.

Parameter: VPI Number

Path: Configuration Manager > Protocols > ATM > Service Records > PVC > Add

Default: None

Options: 0 to 255

Function: Identifies the virtual path of the PVC. The VPI is part of the cell header. The

header can contain a maximum of 8 VPI bits for a UNI connection. This bit

range allows for path identifiers from 0 to 255.

Instructions: Enter a value from 0 to 255.

MIB Object ID: 1.3.6.1.4.1.18.3.4.23.1.5.1.3

Note:

Following the recommendation of the ATM Forum, virtual channel

identifiers from 0 to 31 are reserved for signaling and added functionality.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 93 94

Keine Kommentare

Avaya Configuring ATM Half-Bridge Services Bedienungsanleitung Seite 79