Avaya Configuring Bridging Services Bedienungsanleitung PDF herunterladen (Seite 201)

Configuring Transparent Bridging and Spanning Tree Using the BCC

117351-B Rev. 00

6-13

Clearing the Forwarding Table

You can instruct the router to delete all addresses in the transparent bridge’s

forwarding table without bringing the bridge down and back up. To delete all

addresses, navigate to the global bridge prompt and enter:

clear-forward-table

<state>

state

is one of the following:

yes

Specify

yes

to delete all the addresses in the forwarding table. If you want to

delete all the addresses again later, set this parameter back to

and then to

yes

again.

For example, the following command deletes all the addresses in the forwarding

table:

bridge#

clear-forward-table yes

Customizing Interface Transparent Bridge Parameters

This section describes how to use the BCC to configure bridging on an interface.

Disabling and Reenabling the Bridge on an Interface

To disable transparent bridging on an interface, navigate to the appropriate

interface bridge prompt and enter:

state disabled

For example, the following command disables transparent bridging on an

interface:

bridge/ethernet/2/1#

state disabled

To reenable transparent bridging on the interface, navigate to the appropriate

interface bridge prompt and enter:

state enabled

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 259 260

Keine Kommentare

Avaya Configuring Bridging Services Bedienungsanleitung Seite 201