Avaya Configuring Data Compression Services Bedienungsanleitung PDF herunterladen (Seite 41)

Editing Data Compression Parameters

4-5

4. Click on Apply to implement your changes.

5. Repeat Steps 2 through 4 for each parameter you want to edit.

6. Click on Done to exit the window.

WCP Line Parameter Descriptions

Use the following descriptions as guidelines when you conﬁgure the WCP line

parameters.

Parameter: Enable

Default: Enable

Options: Enable | Disable

Function: Enables or disables data compression on the line.

Instructions: WCP automatically sets this parameter to Enable when you select WCP in

the Select Protocols window. If you want to temporarily disable WCP

rather than delete it from the platform, set this parameter to Disable. Reset

it to Enable to re-enable WCP.

MIB Object ID: 1.3.6.1.4.1.18.3.4.22.1.1.2

Parameter: Compression Mode

Default: Continuous Packet

Options: Continuous Packet | Packet by Packet

Function: Indicates the compression mode on the line.

Continuous Packet Compression (CPC) retains compression history

across packets and allows a higher compression ratio than does Packet-

by-Packet Compression (PPC).

PPC resets compression history at the start of each packet, resulting in a

lower compression ratio. Since PPC does not depend on previous packets,

you should select this option for a link that drops a large number of

packets.

Instructions: Select either Continuous Packet or Packet by Packet.

MIB Object ID: 1.3.6.1.4.1.18.3.4.22.1.1.5

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Keine Kommentare

Avaya Configuring Data Compression Services Bedienungsanleitung Seite 41