Avaya Configuring Interface and Router Redundancy Bedienungsanleitung PDF herunterladen (Seite 28)

Configuring Interface and Router Redundancy

2-8

308626-14.00 Rev 00

Bypassing the Bidding Process

If your secondary router is performing network functions and you want the

primary router to assume these functions after it switches out of the primary role,

the primary and secondary configuration files for both routers must be identical.

The only parameters that are different between the two routers are the primary

configuration file path (if you are using warm boot) and the member ID.

You must also boot the primary router directly into its primary configuration, and

the secondary router into its secondary configuration, bypassing the bidding

process. Failure to do so can result in connection problems related to both routers

having the same IP address on a LAN.

Requirements

Router redundancy has the following requirements:

• Router redundancy is a Nortel Networks proprietary protocol. All routers

running router redundancy must be Nortel Networks routers.

• Interfaces that you configure for router redundancy must be on networks with

no other routers that require route advertisements on that segment of the

network.

• All members of a router redundancy group must have exactly the same

configuration for all redundant interfaces except for the member ID, priority,

resources, and primary configuration file path (if you are using warm boot).

• A router can be a member of only one router redundancy group.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 89 90

Keine Kommentare

Avaya Configuring Interface and Router Redundancy Bedienungsanleitung Seite 28