Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 71)

Monitoring RADIUS Using the BCC show Commands

117385-B Rev 00

B-5

show radius servers general

The

show radius servers general

command displays information about the

overall state of the RADIUS server.

You can use the following filter flags and filter arguments with this command:

The output contains the following information:

-address

Displays information about the server at the specified IP

address only.

Server IP Address Lists the IP address of the RADIUS server.

Server Mode Displays the mode configured for this server:

authentication, accounting, or both.

Server Secret Displays the password configured for this server.

Authentication Type Indicates whether this is a primary or alternate server for

authentication.

Authentication State Indicates whether this server is enabled or disabled for

authentication.

Authentication UDP Port Displays the UDP port number configured for authentication

requests sent to this server.

Accounting Type Indicates whether this is a primary or alternate server for

accounting.

Accounting State Indicates whether accounting is enabled or disabled.

Accounting UDP Port Displays the UDP port number configured for accounting

requests sent to this server.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 98 99

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 71