Avaya Configuring RADIUS Bedienungsanleitung PDF herunterladen (Seite 82)

Configuring RADIUS

C-8

117385-B Rev 00

10.

To enable RADIUS accounting for the RADIUS client on slot 2, enter:

radius-client/2# accounting enabled

11.

Navigate to the top-level RADIUS prompt by entering:

radius-client/2# back

12.

To configure the RADIUS server on address 192.32.24.3, enter:

radius# radius-server address 192.32.24.3

13.

Change the authentication-server-type to primary

by entering:

radius-server/192.32.24.3# authentication-server-type primary

14.

Configure the primary-server-secret to baynet by entering:

radius-server/192.32.24.3# primary-server-secret baynet

Using Site Manager

Before you begin, do the following:

Create and save a configuration file with at least one PPP interface.

Retrieve the configuration file in local, remote, or dynamic mode.

Specify the router hardware if this is a local-mode configuration.

To create a backup pool, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

select an ISDN connector.

The Port Application window opens.

2. Click on

to accept the default for the

Port Application Mode parameter, Dialup

2B + D.

This configures the BRI interface. Repeat

Steps 1 and 2 to configure additional BRI

interfaces.

3. Select

Dialup > Backup Pools

. The Backup Pools window opens.

4. Click on

Add

. The Backup Pools Configuration window

opens.

5. Enter a pool ID, then click on

. The Backup Lines Definition window

opens.

(continued)

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 98 99

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring RADIUS Bedienungsanleitung Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software-Handbücher Avaya Configuring RADIUS