Avaya IP Telephony Konfigurationsanleitung Seite 38

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 222
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 37
38 Chapter 2 Prerequisites checklist
P0609327 02
G.723.1 Data Rate 5.3 kbps
6.3 kbps
Choose the preferred data rate for the channel.
G.723.1 Data Rate selects what data rate is used for
transmissions from the Business Communications Manager to
an IP device when the G.723.1-family codec is used (G.723.1
or G.723.1A). This has no effect on any other codec. The
possible values are 5.3 kbps and 6.3 kbps.
T.38 UDP
Redundancy
0, 1, 2, 3 If T.38 fax is enabled on the system, this setting defines how
many times the message is resent during a transmission in
order to avoid errors caused by lost T.38 messages.
Default: 0
Reserved Media
Gateway Codec
G.711
G.729
G.723
Choose the preferred codec that you are using with your IP
network.
Reserved Media Gateway Codec should be set to whatever
is the most-commonly used codec for Media Gateways. It
determines the amount of codec resources reserved for each
Media Gateway. Reserving resources speeds up
establishment of connections. For example, if most calls
through a Media Gateway use the G.711 codec, set this to
G.711. If most calls use G.729, set this to G.729. Note that the
higher the setting (G.723 > G.729 > G.711) the more
resources are set aside for Media Gateways. This may result
in calls failing to go through because of lack of available
resources.
T.38 UDP
Redundancy
0-3 Default: 0 (transmitted only once)
This setting defines the number of times the system will
transmit a UDP packet over the network. This setting acts as
an error control mechanism for unreliable networks by
providing the same information more than once, with the
intention that at least one of the copies will transmit correctly.
WARNING: Each redundancy requires the same amount of
bandwidth as the original message. This means that a
redundancy of 3 requires four times the bandwidth of a single
transmission.
For a more detailed descriptions of the media gateway or other information about the media services card
(MSC) settings for the Business Communications Manager, refer to the Programming Operations Guide,
MSC section.
Table 8 IP terminals general record fields (Continued)
Field Value Description
Seitenansicht 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 221 222

Kommentare zu diesen Handbüchern

Keine Kommentare