Avaya Site Administration Reference Release 3.1 Bedienungsanleitung PDF herunterladen (Seite 72)

Avaya Site Administration Reference

Routing outgoing calls

World class routing

Your system uses world class routing to direct an outgoing call. There are two types of

routing:

 Automatic Alternate Routing (AAR) is used for calls within your company over your own

private network.

 Automatic Route Selection (ARS) is used for calls that go outside your company over

public networks. ARS is also used to route calls to remote company locations if you do

not have a private network.

Adding a new area code or prefix

A common task for system administrators is to configure their system to recognize new

area codes or prefixes.

Tip:

If your local area code is changing or splitting, call the Avaya helpline and have

them walk you through all the changes needed to have your system recognize

the new area code.

When you want to add a new area code or prefix, you look up the settings for the old area

code or prefix and enter the same information for the new one.

Let’s add a new area code. When the California area code, 415, splits and portions

change to 650, you’ll need to add this new area code to your system.

Tip:

If you do not need to use 1 for area code calls, omit the 1 in Steps 2, 4, and 6 in

our example. Also, enter 10 in the Total Min and Total Max fields (instead of 11)

in Step 8.

To add this non-local area code:

1 Open a GEDI window for the voice system you want to administer.

2 Type list ars route-chosen 14152223333 and press the ENTER key.

You can use any 7-digit number after 1 and the old area code (415). We used 222-

3333.

The ARS Route Chosen Report screen appears.

3 Write down the Total Min, Total Max, Route Pat, Call Type, and Node number from

this screen.

In this example, the Total Min is 11, Total Max is 11, Route pattern is 30, and the Call

Type is fnpa.

4 Type change ars analysis 1650 and press the ENTER key.

Enter 1 and the new area code (650). The ARS Digit Analysis Table screen appears.

5 Use the arrow keys to move to a blank Dialed String field.

If the dialed string is already defined in your system, the cursor appears in the

appropriate Dialed String field, where you can make changes.

6 Enter 1650 in the Dialed String field.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 177 178

Keine Kommentare

Avaya Site Administration Reference Release 3.1 Bedienungsanleitung Seite 72