Avaya Bay Command Console Bedienungsanleitung PDF herunterladen (Seite 27)

Overview of the BCC

117383-D Rev 00

1-9

Module

The BCC uses the term module to identify network media-specific I/O modules

(for Ethernet, Token Ring, etc.). Each module has one or more connectors for

attachment to a physical network transmission medium.

Slot

The BCC uses the term slot to identify the location, as well as a physical and

electrical means, for attaching boards to logic and power connections available on

the device chassis. Note the following:

• Multislot devices such as the BLN or BCN router accommodate a system

module (SRM-L) in one slot, and one link module in each remaining slot.

• Single-slot devices such as the AN, ANH, ASN, and ARN routers

accommodate one base module (slot 1), which may be augmented by one or

two adapter modules, and one expansion module.

Connector

The BCC uses the term connector to identify the physical and electrical means to

interconnect a network device (slot or module) directly or indirectly to a physical

network transmission medium.

Line

The BCC uses the term line to identify the physical (and in some cases, logical)

circuit identified typically by means of a slot, connector, interface type (ethernet,

sync, fddi, and so on), and, where applicable, a channel number (such as with

T1/E1 interface types).

Port

The BCC uses the term port to identify an interface object defined by its type (for

example, an Ethernet port) and location (slot and connector) within a network

device. On a network device, a port is also a logical point of termination for data

sent or received by a specific protocol or application.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 139 140

Keine Kommentare

Avaya Bay Command Console Bedienungsanleitung Seite 27