Avaya Configuring and Managing Routers with Site Manager Bedienungsanleitung PDF herunterladen (Seite 209)

Monitoring Trap and Event Messages

309081-14.20 Rev 00

7-9

Specify a value for Trap Types (Table 7-2), then click on OK.

After you select a trap type, you return to the Configuration Manager window.

5. Choose File > Save to save the configuration file.

See Chapter 3, “Modifying and Saving Router Configurations,” for more

instructions on saving configuration files.

Specifying Trap Messages by Protocol Entity and Event Severity

If you configure an SNMP manager’s trap type to specific, you instruct the SNMP

agent to send trap messages based on the protocol entity and event severity level

that you specify. You must specify both criteria. For example, if you select IP as

the entity and Fault as the event severity, you receive only IP fault messages. If

you want messages for another entity, you must specify a separate entry.

To set up specific trap messages:

1. In the Configuration Manager window, choose Protocols > IP > SNMP >

Trap Configuration > Interfaces.

Table 7-2. Trap Types

Type*

* Specifying generic or specific trap messages minimizes the agent’s use of router resources.

Description

All Instructs the agent to transmit cold-start and warm-start traps, as well as

all other enabled traps (authentication failure, fault, warning, debug,

information, and trace traps).

Generic Instructs the agent to transmit well-defined SNMP traps (cold-start,

warm-start, and authentication failure traps).

The agent is automatically enabled to send cold-start and warm-start

traps. To transmit authentication failure trap messages, you must enable

the Authentication Failure Trap parameter. See

Configuring SNMP, BootP,

and DHCP Services

for instructions.

Specific Instructs the agent to send only trap messages for a specific protocol

entity and event severity level (fault, warning, debug, information, and

trace).

See “Specifying Trap Messages by Protocol Entity and Event Severity

” on

page 7-9

for instructions.

None Prohibits the SNMP agent from transmitting traps to the SNMP manager.

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 385 386

Keine Kommentare

Avaya Configuring and Managing Routers with Site Manager Bedienungsanleitung Seite 209