
Site Manager Parameters
308627-14.20 Rev 00
A-51
Parameter: Import Summaries
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Areas
Default: True
Options: True
|
False
Function: Specifies whether summary advertisements are imported by an NSSA or stub
area. You cannot set this parameter unless you first set the Import AS Extern
parameter to Import No External or Import NSSA.
Instructions: Set to False if you do not want to import summary advertisements to the stub
area or NSSA. Otherwise, accept the default, True.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.2.1.8
Parameter: Cost for PtP Links
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Areas
Default: Enable
Options: Enable
|
Disable
Function: Indicates whether OSPF calculates the cost for a point-to-point link.
Instructions: Enable or disable cost calculation as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.1.10
Parameter: NSSA Translate
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Areas
Default: Disable
Options: Enable
|
Disable
Function: Enables or disables the forced translation of type 7 AS external LSAs to type
5 LSAs by an NSSA border router. If you set this parameter to Enable, the
ABR translates the LSAs. If you set this parameter to Disable, the NSSA
border router becomes a candidate for NSSA translator election if no other
ABRs are configured as unconditional NSSA translators. The router with the
highest OSPF router ID is designated as the translating router.
Instructions: Set to Enable if you want to force the translation of type 7 AS external LSAs
to type 5 LSAs by an NSSA border router. Otherwise, accept the default,
Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.2.1.11
Kommentare zu diesen Handbüchern