
Configuring Traffic Filters and Protocol Prioritization
A-8
308645-14.00 Rev 00
Parameter: Less Than or Equal Queue
Path: Configuration Manager >
interface connector
> Edit Circuit > Protocols >
Edit Protocol Priority > Priority/Outbound Filters > Create > Create Priority/
Outbound Template > Actions > Length > Prioritization Length
Default: NORMAL
Options: HIGH
|
LOW
|
NORMAL
Function: Specifies the queue in which a packet is placed if its length is less than or equal
to the value of the Packet Length parameter. For example, if Packet Length is set
to 1024 bytes, any packet that is 1024 bytes or less is placed in the queue you
specify.
Instructions: Accept the default, NORMAL, or select LOW or HIGH.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.4.1.8
Parameter: Greater Than Queue
Path: Configuration Manager >
interface connector
> Edit Circuit > Protocols >
Edit Protocol Priority > Priority/Outbound Filters > Create > Create Priority/
Outbound Template > Actions > Length > Prioritization Length
Default: LOW
Options: HIGH
|
LOW
|
NORMAL
Function: Specifies the queue in which a packet is placed if its length is greater than the
value of the Packet Length parameter. For example, if Packet Length is set to
1024 bytes, any packet that is 1025 bytes or larger is placed in the queue you
specify for this parameter.
Instructions: Accept the default, LOW, or select NORMAL or HIGH.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.4.1.9
Kommentare zu diesen Handbüchern