Avaya Using Technician Interface Software Bedienungsanleitung PDF herunterladen (Seite 50)

Using Technician Interface Software

2-4 114088 Rev. A

Using the commit Command

Enter the following command after issuing one or more set commands:

commit

The commit command causes the changes you made to the conﬁguration to take

effect in active memory, but not in Flash memory. You must use the

save

command subsequently to save changes to a conﬁguration ﬁle (conﬁg) and Flash

volume on the router.

The Technician Interface software service resets when you enter the

commit

command.

Using the save Command

After you set and commit changes to the current conﬁguration running in active

memory on the router, use the

save command to store that conﬁguration to a ﬁle

on a Flash memory volume, as follows:

save conﬁg

<vol>

<ﬁlename>

Console Port Parameters

This section describes parameters for conﬁguring the serial (console) port on the

router:

• Parameter

• Attribute name

• Attribute number

• Bay Networks default setting

• Options or range of valid settings

• Parameter’s function

• Instructions for setting the parameter

• Command you enter to conﬁgure or monitor the parameter

Note: You can also use the save command to save the current contents of the

router’s Event log, environment variable list, or alias list. Refer to Chapters 6,

7, and 9 for more information on these applications of the

save command.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 365 366

Keine Kommentare

Avaya Using Technician Interface Software Bedienungsanleitung Seite 50