Avaya 6424D+M Bedienungsanleitung PDF herunterladen (Seite 52)

Remote Loopback Test

This test requires compatible AT&T equipment at the remote end.

The remote loopback test ensures that no problems with data transmission are occurring in the

data transfer circuit. When you initiate a remote loopback test, data is transmitted from the data

terminal, through your ADM and the network to the data module at the far-end, where it is

looped back to your ADM. A data call must be established before you initiate a remote loopback

test.

To initiate a remote loopback test:

1 Establish a data call.

2 Rapidly type the Attention sequence (default value is +++).

3 Type at the CMD: prompt:

test remote

The ADM will display:

REMOTE LOOPBACK TEST

ENTER ATTENTION SEQUENCE TO END TEST

Or, if you are not on a data call, the ADM’s response is:

Test Remote cannot be used at this time

4 Type characters on your terminal keyboard and check to see that they are being echoed as

typed.

If you find no errors, the ADM passed the test.

5 Rapidly type the Attention sequence (default value is +++) to end the test. Ending the test

does not end the call. You will return to local mode, and the ADM will be ready to transmit

data.

Call Status: Data Call Active

Type H for help.

6 At the CMD: prompt, type

continue

to return to Data Mode.

Loopback Test.)R

5-2 Chapter 5

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 73 74

Keine Kommentare

Avaya 6424D+M Bedienungsanleitung Seite 52