Avaya B5800 Bedienungsanleitung PDF herunterladen (Seite 241)

establish communication and then changed (at both the SNMP agent and manager

ends) for security.

7. Click OK.

8. Select File > Save Configuration to send the configuration back to the B5800

Branch Gateway and then select reboot.

After the reboot, the SNMP manager will be able to discover the control unit. The

discovery includes the control unit type and the current level of core software.

Enabling SNMP trap sending

Procedure

1. Start Manager and connect to the B5800 Branch Gateway system.

2. In the left navigation pane, click System.

3. Click the System Events tab.

4. In the Configuration sub-tab, in the SNMP Agent section, ensure the SNMP

Enabled check box is selected.

5. In the Community (read-only) field, enter the SNMP community name to which

the system belongs.

This community name must match that used by the SNMP manager application

when sending requests to the device. The community public is frequently used to

establish communication and then changed (at both the SNMP agent and manager

ends) for security.

6. In the SNMP Port field, accept the default.

7. In the Device ID field, enter the alarm ID or PID of the registered system.

Note:

This enables product alarming back to Avaya via the Secure Access Link (SAL).

The unique alarm ID is included in the var-bind of all SNMP trap notifications sent

by the system. The alarm ID, or PID, is parsed out of the alarm and used for

automatic case creation by matching the registered system's customer record

with the alarm event.

8. In the Contact field, enter contact information as appropriate.

9. In the Location field, enter location information as appropriate.

10. Click the Alarm tab.

11. Click Add.

12. In the New Alarm section, do the following:

a) Click the Trap option button.

SNMP

Implementing the Avaya B5800 Branch Gateway November 2011 241

1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 341 342

Keine Kommentare

Avaya B5800 Bedienungsanleitung Seite 241