Avaya IP Telephony Konfigurationsanleitung Seite 106

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 146
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 105
106 Efficient Networking
P0937663 03.1
Consider there are four IP telephony ports per site.
Each site supports four VoIP ports. Assume the codex is G.729 Annex B, 20 ms payload.
Assuming full-duplex links, peak bandwidths per call are between 24.8 kbit/s and 27.6 kbit/s peak
transmission or approximately 28 kbit/s, as shown in Figure 43 from Table 14 on page 102.
Figure 43 Network loading bandwidth
Route R1-R2 needs to support four VoIP Calls. R4-R5 needs to support eight VoIP calls. The
incremental peak bandwidth for VoIP traffic is therefore:
With Business Communications Manager VoIP gateway bandwidth requirements and
Traceroute
measurements, the R4-R5 link is expected to support the Santa Clara/Richardson,
Santa Clara/Tokyo and the Ottawa/Tokyo traffic flows. The other IP telephony traffic flows do not
route over R4-R5. A peak of eight calls can be made over R4-R5 for the four IP telephony ports
per site. R4-R5 needs to support the incremental bandwidth of 8 x 12 = 96 kbit/s.
To complete this exercise, the traffic flow from every site pair needs to be summed to calculate the
load on each route and loaded to the link.
Codec
Type
Payload
Size
PPP B/W FR B/W
No SP
Silence
Suppression No SP
Silence
Suppression
ms peak
(kbit/s)
peak
(kbit/s)
Avg
(kbit/s)
peak
(kbit/s)
peak
(kbit/s)
Avg
(kbit/s)
G.729
(8 kb/s)
10 41.6 20.8 47.2 23.6
20 24.8 12.4 27.6 13.8
30 19.2 9.6 21.1 10.6
R1-R2 peak VoIP Load 4 28 kbit/s()112kbit/s==
R4-R5 peak VoIP Load 8 28 kbit/s()112kbit/s==
Seitenansicht 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 145 146

Kommentare zu diesen Handbüchern

Keine Kommentare