Avaya IP Telephony Konfigurationsanleitung Seite 115
- Seite / 146
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Silence compression 115
IP Telephony Configuration Guide
Silence compression on Full Duplex Links
On full duplex links, the transmit path and the receive path are separate channels with bandwidths
usually quoted in terms of individual channels. Figure 47 shows the peak bandwidth requirements
for one call on a full-duplex link without silence compression. Voice packets are transmitted, even
when a speaker is silent, therefore, the peak bandwidth and the average bandwidth used is equal to
the full transmission rate for both the transmit and the receive channel.
Figure 47 One Call on a Full Duplex Link Without Silence compression
When silence compression is enabled, voice packets are only sent when a speaker is talking. When
a voice is being transmitted, it uses the full rate transmission rate. Since the sender and receiver do
not share the same channel, the peak bandwidth requirement per channel is still equal to the full
transmission rate. Figure 48 shows the peak bandwidth requirements for one call on a full-duplex
link with silence compression enabled. The spare bandwidth made available by silence
compression is used for lower priority data applications that can tolerate increased delay and jitter.
Figure 48 One Call on a Full Duplex Link With Silence compression
Time ->
Bandwidth ->
Tx Chan
Bandwidth ->
Bandwidth Used
Rx
Tx
Fred Here.
Hello Fred. This is Susan. Do you have a minute?
Time ->
Sure!Hi!
Rx Chan
Channel Max
Channel Max
Hello Fred. This is Susan.
Do you have a minute?
Fred here.
Hi!
Sure!
Conversation
Bandwidth used
Voice frames sent even when speaker is silent
Time
Channel/Link max
Tx channel
Bandwidth
Tx
Rx
Channel/Link max
Rx channel
Bandwidth
Time
Time ->
Bandwidth ->
Bandwidth Used
Rx
Tx
Fred Here.
Hello Fred. This is Susan. Do you have a minute?
Time ->
Sure!Hi!
Bandwidth ->
Tx ChanRx Chan
Channel Max
Channel Max
Hello Fred. This is Susan.
Do you have a minute?
Fred here.
Hi!
Sure!
Conversation
Bandwidth used
Independent Tx and Rx bandwidth not shared by half-duplex calls.
Bandwidth available for data apps.
Time
Channel/Link max
Tx channel
Bandwidth
Tx
Rx
Channel/Link max
Rx channel
Bandwidth
Time
- Business Communications 1
- Manager 2.5 1
- IP Telephony Configuration 1
- Trademarks 2
- Contents 3
- Chapter 4 4
- Chapter 5 5
- Chapter 6 6
- Appendix A 6
- 12 Tables 12
- Before you begin 13
- Symbols used in this guide 13
- Text conventions 14
- Acronyms 14
- Related publications 15
- How to get help 16
- Chapter 1 17
- Introduction 17
- IP telephones and VoIP trunks 18
- Figure 1 Network diagram 19
- Telephones 20
- IP network 21
- Key IP telephony concepts 22
- Jitter Buffer 23
- QoS routing 23
- Chapter 2 25
- Prerequisites checklist 25
- Network assessment 26
- Resource assessment 27
- Keycodes 27
- Defining published IP address 28
- IP telephones 30
- NetVision wireless telephones 30
- Chapter 3 31
- Installing IP telephones 31
- Choosing a codec 33
- Choosing a Jitter Buffer 34
- Before installing 34
- Using a 3-port switch 35
- NORTEL NETWORKS 36
- Manual Cfg DHCP(0 no, 1 yes) 36
- Field Value Description 37
- Slow connection 40
- One-way or no speech paths 40
- Dropped voice packets 40
- Changing the contrast level 40
- Configuring DHCP 41
- Figure 5 IP Terminal status 42
- Figure 6 Configuration menu 42
- Figure 8 Configuration menu 44
- Download Pending 44
- Customizing feature labels 46
- Moving IP telephones 47
- Keep DN alive 48
- Figure 12 i2050 Switch type 49
- 7 Click on the BCM option 50
- Configuring NetVision records 52
- /symbol.com> 53
- <http:/ 53
- Testing the handset functions 55
- Changing a handset Name 57
- Configuring VoIP trunks 59
- Configuring media parameters 60
- Setting silence compression 61
- Setting jitter buffers 62
- Outgoing call configuration 63
- Figure 18 Trunk/Line data 64
- Configuring a remote gateway 66
- Configuring PSTN fallback 68
- Enabling PSTN fallback 69
- Setting up the VoIP schedule 69
- Configuring routes 70
- Figure 26 VoIP schedule 73
- Activating the VoIP schedule 74
- Turning on QoS monitor 75
- Incoming call configuration 76
- Example configuration 78
- Making calls 82
- Connecting an i200X telephone 83
- Quality of Service Monitor 86
- Port settings 86
- Using firewalls 87
- Using a gatekeeper 88
- The call signaling method 89
- Gatekeeper call scenarios 91
- Typical applications 93
- Setting up the system 95
- Efficient Networking 99
- Network engineering 100
- LAN engineering examples 103
- WAN engineering 104
- Setting Non-linear processing 105
- (8 kb/s) 106
- P0937663 03.1 106
- Traceroute 106
- Enough link capacity 107
- Not enough link capacity 107
- Further network analysis 108
- Reduce link delay 109
- Reducing hop count 109
- Adjust the jitter buffer size 110
- Reduce packet errors 110
- Routing issues 111
- Appendix B 113
- Silence compression 113
- Comfort noise 116
- Appendix C 117
- Network performance utilities 117
- Appendix D 119
- Interoperability 119
- Speech path setup methods 120
- Media path redirection 120
- Gatekeeper 120
- Symbol NetVision telephones 121
- 122 Interoperability 122
- Appendix E 123
- Quality of Service 123
- Measuring Intranet QoS 124
- Recording routes 125
- Adjusting Ping measurements 126
- Measurement procedure 127
- 128 Quality of Service 128
- Traffic mix 129
- TCP traffic behavior 129
- Network Quality of Service 130
- Quality of Service parameters 131
- Fallback to PSTN 132
- Glossary 133
- 134 Glossary 134
- Glossary 135 135
- 136 Glossary 136
Verwandte Produkte und Handbücher für Gateways / Controller Avaya IP Telephony
(54 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.044 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern