Avaya IP Telephony Konfigurationsanleitung Seite 53

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 146
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 52
Chapter 4 Installing NetVision telephones 53
IP Telephony Configuration Guide
Gathering system information before you start
Ensure the following is complete, or the information is on hand before you start configuring your
NetVision telephones:
Assigning H.323 Terminals records
The H.323 Terminals record (Services, Telephony Services, IP Telephony) identifies the
NetVision handsets within the Business Communications Manager. The Business
Communications Manager uses the information from this file to determine if the handset will be
allowed to connect to the system. When you configure the handset with the NVPA file, the Name
and PIN that you use, must match what is in the H.323 Terminals record.
Notes
The following are some notes about the process of configuring handsets to the Business
Communications Manager.
You must have an H.323 record configured before you configure the handsets with the Nortel
NVPA.
If you do not specify a DN in the H.323 record, one will automatically be assigned to the
handset. If you specified a DN record, it will appear under the Active DNs heading once the
handset connects to the system. If you want to specify a range of DNs, you can use the Add
1. The Business Communications Manager has been set up to allow
IP telephones.
Refer to Chapter 2,
Prerequisites checklist, on
page 25.
2. If you are configuring the Business Communications Manager
records before you configure the handset: You know which DNs
you want to assign to the handsets and you have all the line,
restrictions, and telephony information you require to create or
update a DN record for each telephone.
DN records
3. You have downloaded the NVPA application and NetVision Phone
Administrator Guide, which provides a list of the information you
require to fill out that tool for each handset.
http://www.symbol.com/services/downloads/nvfirmware2.html
Download the latest version of
the NetVision Phone
Administrator
4. You have obtained the Symbol NetVision serial cable, which is used to
transfer configuration information between the computer where the tool is
installed and the handset.
Purchased from Symbol
at
<http:/
/symbol.com>
(part number: 25-20528-01)
5. You have a list of names that you will use for the handsets. Each name
must be unique to a handset. Both the H.323 Terminals record and the
NVPA record must have exactly the same name.
Name field
6. You have identified a PIN for each handset.
Password field
Seitenansicht 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 145 146

Kommentare zu diesen Handbüchern

Keine Kommentare