Avaya Configuring APPN Services Bedienungsanleitung PDF herunterladen (Seite 76)

Configuring APPN Services

3-18

Parameter: Port Enable/Disable

Default: Enable

Options: Enable | Disable

Function: Enables or disables APPN routing on this port.

Enable — Initializes the selected APPN port. You can also use the Enable

setting to initialize an existing APPN port that you disabled earlier.

Disable — Forces the APPN port into the “down” (inoperative) state.

Instructions: Select Disable to disable APPN routing over this port.

Select Enable to enable or re-enable APPN routing over this port.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.3.1.2

Parameter: Port Address

Default: None

Options: None

Function: Speciﬁes the interface address for this port.

Instructions: This is the MAC address, SDLC address, or DLCI and SAP address that

you speciﬁed when you added the original circuit to the interface. A MAC

address starts with the 0x preﬁx and ends with the SAP value.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.3.1.38

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 145 146

Keine Kommentare

Avaya Configuring APPN Services Bedienungsanleitung Seite 76