Avaya Configuring APPN Services Bedienungsanleitung PDF herunterladen (Seite 90)

Configuring APPN Services

3-32

Parameter: Implicit Link Deactivation Time

Default: 120

Range: 5 to 255

Function: Speciﬁes the time (in seconds) before implicit link stations on this port

deactivate if it is an HPR limited resource. This parameter is available

when the Implicit Limited Resource is set to Yes, and when the HPR

Support and the HPR Implicit LS Support parameters are set to Enable.

Instructions: Enter a value in the range 5 to 255, inclusive.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.3.1.37

Parameter: HPR UI SAP

Default: C8

Options: Any 2-digit hexadecimal value

Function: Speciﬁes the local HPR service access point address for unnumbered

information (UI) frames on this port. A UI frame is an LLC frame type on

which LLC does not perform link-level error recovery.This parameter is

available when HPR Support is set to Enable.

In base APPN/LLC2 conﬁgurations, LLC2 performs link-level recovery

by sending information frames (I-frames). If you disable link-level error

recovery with the HPR Link-Level Error Recovery parameter, APPN

sends the HPR network layer packets as UI frames, since RTP performs

the link-level error recovery on an end-to-end basis.

Instructions: Enter any 2-digit hexadecimal value. The 0x preﬁx is optional. For

example, the value C8 uses the 0x preﬁx.

MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.3.1.39

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 145 146

Keine Kommentare

Avaya Configuring APPN Services Bedienungsanleitung Seite 90