Avaya Configuring DLSw Services Bedienungsanleitung Seite 197

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 256
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 196
Using DLSw Prioritization
114063 Rev. A 6-19
6. Enter a bandwidth.
The bandwidth for Q0 must be greater than 0. You can assign any percentage
between 0 and 99 to subsequent queues, as long as the combined bandwidth
for all queues totals 100 percent.
On low-speed lines running NetBIOS, you should allocate 20 percent of the
total bandwidth due to endstation timing.
7. Click on OK.
The Add/Edit/Delete Queues window reappears.
8. Continue to add queues until the total bandwidth is 100 percent.
Repeat Steps
3 through 7 until the total bandwidth is 100 percent. Figure 6-12
shows a sample screen after adding queues.
Figure 6-12. Configured Queues
9. Click on Done.
The Peer Queue Configuration window reappears
(Figure 6-13). Now two of
the DLSw peers use peer-specific queues and two use the default queue
configuration.
Seitenansicht 196
1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 255 256

Kommentare zu diesen Handbüchern

Keine Kommentare