
Configuring DLSw Services
C-20 114063 Rev. A
Table C-5. DLSw Configuration Troubleshooting
Problem Possible Cause Action/Solution
The log file contains no
DLSw, SDLC, LLC, TCP
messages.
1. Specific router slot not
active for DLSw
configuration
2. Image missing
components
1. Check the hardware
configuration to see if DLSw
is configured on the slot.
2. Make sure that the router
software image contains
DLS.exe, LLC.exe,
NBASE.exe, and SDLC.exe.
Broadcasts are not seen on
the desired LAN segments.
Peer not configured for
destination router
Configure at least one peer
that must receive
broadcasts.
Table C-6. DLSw Interface Troubleshooting
Problem Possible Cause Action/Solution
The DLSw interface state is
DOWN.
1. Physical interface not up
2. DLC interface not up
1. Check connections; make
sure that the physical
interface is up.
2. Check the DLC
configuration and delete
interface if necessary;
notify Bay Networks.
The DLC interface is
DOWN.
Physical interface not up Check connections; make
sure that the physical
interface is up.
(continued)
Kommentare zu diesen Handbüchern