
Configuring DLSw Services
4-2 114063 Rev. A
Starting DLSw the First Time
When you first start DLSw, you use Site Manager to edit parameters that DLSw
requires before it can process network traffic. Depending on the type of network
interface you are configuring, DLSw displays a series of screens. Table 4-1 lists
each type of network interface, the Site Manager screens that appear for that
interface, and the required parameters that you must specify before DLSw can
start.
Table 4-1. DLSw Startup Screens and Required Parameters
Network
Interface
Site Manager Screen Required Parameters/Options
Ethernet • DLSw Global Parameters
• Use Source Route
Encapsulation?
• Source Routing Global
Parameters
• Edit SR Interface
• DLSw Slot Configuration/Add
• DLSw Peer Configuration/Add
• DLSw SAP Configuration
IP Virtual Ring
OK or CANCEL. If CANCEL, go to the
DLSw Slot Configuration screen
SR Bridge ID, SR Bridge Group LAN ID,
SR Bridge Internal LAN ID
Source Routing Ring Number
For dual-switch only: Slot, IP Address
For dual-switch only; Peer IP Address
Default values usually acceptable
Token Ring (or
other SRB)
• Source Routing Global
Parameters
• Edit SR Interface
• DLSw Global Parameters
• DLSw Slot Configuration/Add
• DLSw Peer Configuration/Add
• DLSw SAP Configuration
SR Bridge ID, SR Bridge Group LAN ID,
SR Bridge Internal LAN ID
Source Routing Ring Number
IP Virtual Ring
For dual-switch only: Slot, IP Address
For dual-switch only; Peer IP Address
Default values usually acceptable
(continued)
Kommentare zu diesen Handbüchern