Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung PDF herunterladen (Seite 30)

Configuring Ethernet, FDDI, and Token Ring Services

2-6

305259-A Rev 00

Using the BCC

To enable BofL messages on an Ethernet interface, access an existing Ethernet

line service and enter:

bofl enable

To disable BofL messages on an Ethernet interface, access an existing Ethernet

line service and enter:

bofl disable

For example, to enable BofL messages, enter the following command sequence:

box#

ethernet slot 13 connector 1

ethernet/13/1#

bofl

enable

Using Site Manager

To enable or disable BofL messages, complete the following tasks:

Setting the BofL Timeout

With BofL enabled, a network timeout will occur if five periods elapse without a

successful BofL message transmission. When timeout occurs, the router

automatically disables and reenables the Ethernet interface. For example, if you

set the BofL timeout interval to 10 seconds, the interface must successfully

transmit a BofL message within 50 seconds.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose an

XCVR

Connector.

The Edit Connector window opens.

2. Choose

Edit Line

. The Edit CSMA/CD Parameters window

opens.

3. Set the

BofL Enable

parameter. Click on

Help

or see the parameter description on

page A-2

4. Click on

. You return to the Edit Connector window.

5. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 135 136

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring Ethernet, FDDI, and Token Ring Services