Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung PDF herunterladen (Seite 97)

Site Manager Parameters

305259-A Rev 00

A-13

Token Ring Line Parameters

Parameter: Enable

Path: Configuration Manager > TOKEN Connector > Edit Line > Edit Token Ring

Parameters

Default: Enable

Options: Enable

Disable

Function: Enables or disables the token ring circuit.

Instructions: Set to Disable if you want to disable the token ring circuit.

MIB Object ID: 1.3.6.1.4.1.18.3.4.2.1.2

Parameter: MAC Address Override

Path: Configuration Manager > TOKEN Connector > Edit Line > Edit Token Ring

Parameters

Default: None

Options: Any valid, 48-bit MAC-level address

Function: Assigns a user-specified MAC address.

Instructions: If you want the router to generate the MAC address for this token ring interface,

ignore this parameter.

If you want to specify a MAC address (for example, to avoid host number

conflicts on a directly connected IPX or XNS network), enter the 48-bit MAC

address in MSB format; that is, enter 0x followed by 12 hexadecimal digits.

If you enter a MAC address with this parameter, you must set the MAC Address

Select parameter to CNFG.

MIB Object ID: 1.3.6.1.4.1.18.3.4.2.1.9

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 135 136

Keine Kommentare

Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung Seite 97