Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung PDF herunterladen (Seite 70)

Configuring Ethernet, FDDI, and Token Ring Services

4-6

305259-A Rev 00

Specifying the Ring Speed

You can set the ring speed for a token ring interface to 4 or 16 Mb/s. By default,

the ring speed is 16 Mb/s.

If you use 16 Mb/s, the router enables the early token release protocol, which is

used extensively on 16 Mb/s media. In the unlikely event that you want to disable

early token release over 16 Mb/s token ring media, disable early token release as

described in the next section.

Using the BCC

To set the ring speed for a token ring interface, access an existing token ring line

service and enter:

speed

<value>

value

is either 4 or 16.

For example, to set the ring speed to 16 Mb/s, enter the following command

sequence:

box#

tokenring slot 9 connector 1

tokenring/9/1#

speed 16

Using Site Manager

To set the ring speed, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose a

TOKEN

Connector

The Edit Connector window opens.

2. Choose

Edit Line

. The Edit Token Ring Parameters window

opens.

3. Set the

Speed

parameter. Click on

Help

see the parameter description on

page A-14

4. Click on

. You return to the Edit Connector window.

5. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 135 136

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring Ethernet, FDDI, and Token Ring Services Bedienungsanleitung Seite 70

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring Ethernet, FDDI, and Token Ring Services