Avaya Configuring MPLS Services Bedienungsanleitung PDF herunterladen (Seite 29)

Starting MPLS

305754-A Rev 00

2-5

Adding Protocols to an Existing Record

To add protocols to an existing LDP session record, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on an ATM link module interface

(

ATM1

The Select Connection Type window

opens.

2. Click on

MPLS

. The Edit MPLS Connector window opens.

3. Click on

LDP

. The LDP Session Records List window

opens.

4. Click on the session record that you

configured.

(Site Manager supports only one LDP

session record.)

The Protocols menu selection becomes

active.

5. Click on

Protocols

. The Protocols menu opens.

6. Choose

Add/Delete

. The Select Protocols window opens.

7. Click on

. A check mark appears in the box for IP.

8. Click on any other protocols that you want

to add.

A check mark appears in the box for each

additional protocol that you select.

9. Click on

. The IP Configuration window opens.

10. Set the following parameters:

• IP Address

• Subnet Mask

Click on

Help

or see

Configuring IP, ARP,

RIP, and OSPF Services

for details.

The IP address should match the local IP

address that you configured for the LDP

session.

(continued)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring MPLS Services Bedienungsanleitung Seite 29

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring MPLS Services