Avaya Configuring MPLS Services Bedienungsanleitung PDF herunterladen (Seite 43)

Customizing the MPLS Configuration

305754-A Rev 00

3-7

Specifying the Routes Configuration Mode

The routes configuration mode specifies what kind of route table LDP uses. When

you accept the default, Auto, MPLS uses either the OSPF or RIP route table.

When you specify Manual, LDP uses static routes.

To specify the routes configuration mode, complete the following tasks:

Note:

The routes configuration mode takes precedence over the protocol that

you set (see “

Specifying a Protocol for MPLS Route Configuration” on page

3-9). This means that when you set the routes configuration mode to Manual,

LDP disregards the protocol setting.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

MPLS

. The Edit MPLS Connector window opens.

3. Click on

LDP

. The LDP Session Records List window

opens.

4. Set the

Routes Configuration Mode

parameter. Click on

Help

or see the

parameter description on page A-4.

5. Click on

Done

. You return to the Edit MPLS Connector

window.

6. Click on

Done

. You return to the Select Connection Type

window.

7. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring MPLS Services Bedienungsanleitung Seite 43

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring MPLS Services