Avaya Configuring PPP Services Bedienungsanleitung Seite 23

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 118
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 22
114068 Rev. A 1-1
Chapter 1
Starting PPP
PPP is a standard point-to-point protocol for sending data packets over serial
synchronous and asynchronous lines.
This chapter tells you how to configure PPP on a circuit using all default values.
Once you’ve done that, you can customize the configuration as needed. Chapter 2,
“PPP Concepts,” gives you detailed background information on PPP to help you
make appropriate customizing choices. Chapter 3, “Customizing PPP,” describes
how to change the default settings after you’ve configured the circuit.
Configuring PPP on a Circuit
To configure PPP on a circuit, using default values for all parameters:
1. Prepare the configuration file.
Create and save a configuration file that contains at least one WAN
interface.
Retrieve the configuration file in local, remote, or dynamic mode.
Open the configuration file.
2. Select the circuit you want to configure.
If this is a local mode configuration file, specify the router hardware.
Select the link or net module connector on which you are enabling PPP.
3. Enable PPP on the interface.
If you are using Site Manager:
a. Select PPP from the WAN Protocols menu.
Seitenansicht 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 117 118

Kommentare zu diesen Handbüchern

Keine Kommentare