Avaya Configuring SMDS Bedienungsanleitung PDF herunterladen (Seite 41)

114069 Rev. A 3-1

Chapter 3

Enabling SMDS

This chapter provides information on how to enable SMDS. It assumes you have

read Conﬁguring Routers or Conﬁguring Customer Access and Trunks (BNX

Software), depending on the type of installed software, and that you have

1. Opened a conﬁguration ﬁle

2. Speciﬁed router hardware, if this is a local mode conﬁguration ﬁle

3. Selected the link or net module connector on which you are enabling SMDS

When you enable SMDS, you need to conﬁgure only a few parameters. The

Conﬁguration Manager supplies default values for the remaining parameters. If

you want to edit these default values, refer to Chapter 4 for instructions.

Using the MIB Object ID

For each parameter, this chapter and Chapter 4 include default settings, valid

parameter options, the parameter function, instructions for setting the parameter,

and the Management Information Base (MIB) object ID.

The Technician Interface allows you to modify parameters by issuing set and

commit commands with the MIB object ID. This process is equivalent to

modifying parameters using Site Manager. For more information about using the

Technician Interface to access the MIB, refer to Using Technician Interface

Software.

Caution: The Technician Interface does not verify that the value you enter for

a parameter is valid. Entering an invalid value can corrupt your conﬁguration.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Keine Kommentare

Avaya Configuring SMDS Bedienungsanleitung Seite 41