Avaya RMON2 Bedienungsanleitung PDF herunterladen (Seite 52)

Configuring RMON and RMON2

4-4

300018-A Rev. 00

Specifying the DCM Boot Image Name

By default, the DCM uses the image file in its local flash memory as the DCM

boot image. If you want the DCM to use an image file on the BayStack router’s

flash memory as the DCM boot image, you must:

• Set the Boot Option parameter to Download.

When the DCM boots in Download mode, the DCMMW software moves a

copy of the router’s image to DCM shared memory.

• Specify the image to download with the Image Name parameter.

The boot image name cannot exceed 255 characters.

To specify the DCM boot image, enter the router volume and file name for the

image you want the DCM to boot, using the following format:

<volume_number:filename>

For example:

1:dcm_image

If you want the DCM to use the image file in DCM local flash memory as the

DCM boot image, remember to reset the Boot Option parameter to Local.

To specify the DCM boot image name, complete the following steps:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Platform

The Platform menu opens.

2. Choose

DCM 11.0 and later

. The DCM 11.0 and later menu opens.

3. Choose

Global.

The Global menu opens.

4. Choose

Base Module DCM

Expansion Module DCM

The Edit Base Module DCM Parameters

window or the Edit Expansion Module

DCM Parameters window opens.

5. Set the

Boot Option

parameter to

Download

. Click on

Help

or see the

parameter description on page A-2.

(continued)

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya RMON2 Bedienungsanleitung Seite 52

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya RMON2