Avaya Business Communication Manager 5.0 - Configuration - Devices Bedienungsanleitung PDF herunterladen (Seite 39)

System parameter configuration 39

Nortel Business Communication Manager 5.0

Configuration — Devices

NN40170-500 02.04 Standard

August 2009

Synchronize system with an NTP Server or trunk

If the system is to synchronize with an NTP Server or trunk, check the

following.

Step Action

1 Click Configuration > System > Date and Time.

2 In the Network Time Protocol Settings pane, click Modify.

3 Set Date and Time Source to NTP or Trunk.

4 In the NTP server address field enter the IP address of the NTP server.

5 Set the number of seconds between synchronizations in normal operations

(Synch Every).

6 In the bottom frame, ensure that the Time zone is correct for the location of

the local system.

Synch every (s) The number of seconds specified to elapse between contacts

with the NTP server.

1-XXXX: Number of seconds between contacts with the NTP

server.

NTP security mode Select whether the NTP security mode is secured or unsecured.

Raise alarm if clock

differs by at least (s)

The number of discrepancy seconds specified that must occur

before the system notifies you of a time difference from the NTP

server, if the system automatically checks with the NTP server.

NTP key ID ID for accessing the NTP.

<1-65,535>

NTP key string Control key corresponding to ID for accessing the NTP. <8

characters>

Current Date and Time

Date and time The current date and time.

Time zone The appropriate time zone for the location of this system. The

Time zone must be set for software updates to be applied.

Daylight Savings Time The appropriate mode for the Time zone.

Selected: The system automatically updates the time twice a

year.

Cleared: The system never updates the time for Daylight

Savings Time.

<read-only>

Variable Value

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 257 258

Keine Kommentare

Avaya Business Communication Manager 5.0 - Configuration - Devices Bedienungsanleitung Seite 39