Avaya Configuring BOOTP Services Bedienungsanleitung PDF herunterladen (Seite 168)

Configuring SNMP, BootP, and DHCP Services

A-16

308644-15.1 Rev 00

BootP and DHCP Parameters

This section describes the parameters you use to configure BootP/DHCP relay for

your router.

BootP Relay Agent Interface Parameters

Use the following guidelines to configure BootP and DHCP parameters in the

BOOTP Relay Agent Interface Table window.

Parameter: Enable/Disable

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: Enable

Options: Enable

Disable

Function: Specifies whether BootP is active on the network interface.

Instructions: Select Enable to enable BootP on the network interface. Select Disable to

disable BootP on the network interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.2

Parameter: Hops

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: 4

Options: 1 to 16

Function: Specifies the maximum number of hops from the client to the server. A hop is

the logical distance between two devices. If the value in the hops field of a

BOOTREQUEST packet is greater than the number that you specify for this

parameter, the router drops the packet.

Instructions: Accept the default of 4 hops or specify a number from 1 through 16.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.5

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 195 196

Keine Kommentare

Avaya Configuring BOOTP Services Bedienungsanleitung Seite 168