Avaya Configuring BOOTP Services Bedienungsanleitung PDF herunterladen (Seite 171)

Site Manager Parameter Descriptions

308644-15.1 Rev 00

A-19

BootP Address Parameters

Use the following guidelines to configure BootP and DHCP parameters in the

BOOTP Addresses window.

Parameter: Buffer Limit

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: 10

Options: 4 to 1000

Function: Specifies the upper limit of unprocessed BootP/DHCP request/reply packets

allowed on this interface.

Instructions: Specify the buffer limit that you want to set for unprocessed BootP/DHCP

request/reply packets allowed on this interface. Otherwise, accept the default

buffer limit of 4.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.24

Parameter: Input IP Address

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Forward I/F > Add

Default: None

Options: Any valid IP address

Function: Specifies the IP interface that receives BOOTREQUEST packets from clients.

Instructions: Enter the IP address of a numbered network interface that you want to receive

BOOTREQUEST or DHCP packets from clients, then configure this IP address

on the router, if you have not already done so.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.3

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 195 196

Keine Kommentare

Avaya Configuring BOOTP Services Bedienungsanleitung Seite 171