Avaya Configuring DLSw Services Bedienungsanleitung PDF herunterladen (Seite 207)

Editing DLSw Parameters

303523-A Rev. 00

5-71

Parameter: Enable XID PassThru

Default: Disable

Options: Enable | Disable

Function: Specifies whether XID is to be passed through to SDLC when the host is

connected to Token Ring and the remote is SDLC. This parameter is used

for PU2.1 circuits.

Instructions: Accept the default, Disable, or change to Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.19

Parameter: Device Activation Seq

Default: Local Device First

Options: Local Device First | Peer First

Function: Specifies the sequence of activation for SDLC PU2.0 fixed format

primary devices. LocalDeviceFirst specifies that DLS establishes a

connection with the SDLC End Station first. Once the local device

responds successfully, DLS then starts up the SSP connection to the peer.

PeerFirst specifies that DLS starts the SSP connection first, and contacts

the SDLC End Station only after receiving a CONTACT message from

the peer.

Instructions: Accept the default, Local Device First, or change to Peer First.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.12.1.12

Deleting a DLSw Local Device Entry

To delete a DLSw Local Device entry from the router configuration, start at the

DLS Local Device Configuration window (refer to Figure 5-28):

Select the DLSw local device to delete.

Click on Delete.

Editing a DLSw IP Multicast Entry

To edit a DLSw IP multicast entry, begin at the Configuration Manager window:

Select Protocols > DLSw > Multicast IP Table > Multicast IP Table.

1 2 ... 202 203 204 205 206 207 208 209 210 211 212 ... 291 292

Keine Kommentare

Avaya Configuring DLSw Services Bedienungsanleitung Seite 207