Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Bedienungsanleitung PDF herunterladen (Seite 180)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-6

308628-15.0 Rev 00

Parameter: Max Redundant Routes

Path: Configuration Manager > Protocols > IP > BGP > BGP Global

Default: 255

Options: 0 to 255

Function: Specifies the maximum number of IBGP routes to the same destination to be

stored. At least one route is stored, even if 0 is specified.

Instructions: Accept the default value, 255, or enter an integer from 1 through 255.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.14

Parameter: Detect Redundant Connections

Path: Configuration Manager > Protocols > IP > BGP > BGP Global

Default: Enable

Options: Enable

Disable

Function: Specifies whether redundant BGP connections to the same router will be

detected and disallowed. Collision detection (that is, detecting the existence of

redundant connections) is based on router ID. If two BGP peers have multiple

physical connections and want to establish a BGP session across each physical

connection, you must disable this parameter. The advantage of a configuration

with multiple physical connections is redundancy. The disadvantage is that such

a configuration results in multiple copies of each route.

Instructions: If you want only one BGP connection to the same router to be maintained, use

the default. If you want to allow redundant connections, enter Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.16

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 275 276

Keine Kommentare

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Bedienungsanleitung Seite 180