
Site Manager Parameters
308628-15.0 Rev 00
A-9
Parameter: Route with MED
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether BGP considers the multiexit discriminator path attribute in
the route selection process.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.24
Parameter: IBGP ECMP Method
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Disabled
Options: Disabled
|
Route Balance
|
Traffic Balance
Function: Specifies whether IBGP uses ECMP paths provided by the IGP for route
balancing or traffic-load balancing.
Instructions: To configure IBGP to use IGP ECMP routes for route balancing, set this
parameter to Route Balance. To configure IBGP to use IGP ECMP routes for
traffic-load balancing, set this parameter to Traffic Balance.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.26
Parameter: Local Pref Calculation
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enabled
Options: Enabled
|
Disabled
Function: Disables BayRS local preference calculation of received EBGP routes.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.27
Kommentare zu diesen Handbüchern