Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Bedienungsanleitung PDF herunterladen (Seite 254)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-80

308628-15.0 Rev 00

Parameter: BGP Community attribute action

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Announce

Policies

Default: As Is

Options: As Is

Remove

Append

Replace

Function: Specifies the action to be taken on the BGP communities attribute in updates

matching this policy.

Instructions: Use the default, As Is, if you want the BGP Communities attribute to remain

unchanged. Select Remove to remove all BGP communities from an update.

Select Append to add to the update the communities that you have specified

with the BGP Community to announce parameter. Select Replace to replace the

existing communities with the communities you specified.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.10.1.34

Parameter: BGP Communities to match

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Announce

Policies

Default: An empty list

Options: A list of BGP communities

Function: Specifies one or more BGP communities. This policy applies to all BGP

advertisements that match the list.

Instructions: Supply an octet string using the following format: each community ID is 4 bytes

long; 0 in the two most significant bits causes the router to perform the match on

the lower 16 bits; the default empty list means “match any list.”

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.10.1.35

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 275 276

Keine Kommentare

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Bedienungsanleitung Seite 254