
Configuring IP Utilities
6-10 117358-A Rev. A
Using Site Manager
Complete the tasks in the following table to change the Telnet login prompt on the
Telnet console screen.
Changing the Login Timeout
You can specify a value that will determine the number of minutes that can elapse
before the device disconnects the Telnet session if you fail to enter a login ID at
the login prompt.
Using the BCC
By default, the device waits 1 minute before it disconnects the Telnet session if
you fail to enter a login ID at the login prompt. To specify the number of minutes
that can elapse before the device disconnects the Telnet session if you fail to enter
a login ID at the login prompt, navigate to the server-specific prompt and enter:
login-timeout
For example, the following command line causes the device to wait 15 minutes
before it disconnects the Telnet session if you fail to enter a login ID at the login
prompt:
server# login-timeout 15
server#
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose Global Protocols. The Global Protocols menu opens.
3. Choose Telnet Server. The Telnet Server menu opens.
4. Choose Global. The Telnet Server Global Parameters
window opens.
5. Set the TI Prompt parameter. Click on
Help or see the parameter description on
page A-11.
6. Click on OK. Disconnects the current Telnet session.
Kommentare zu diesen Handbüchern