Avaya Configuring TDM Services Bedienungsanleitung PDF herunterladen (Seite 34)

Configuring TDM Services

2-14

309426-14.10 Rev 01

Setting the Clock Standard

Before configuring a TDM circuit, you can set the TDM clock standard to use the

default clock or to use either the T1 or E1 frequency. By default, the TDM clock

standard is set to the standard that will be used for TDM. The TDM clock standard

affects all TDM circuits (CES and switched.)

Using the BCC

To set the clock standard, navigate to the TDM prompt (for example,

box#; tdm

)

and enter:

clock-standard

frequency

specifies whether you are using the T1 or E1 clock frequency for the

clock standard.

For example, the following command chooses the E1 frequency as the clock

standard:

tdm#

clock-standard e1

Note:

A change to the TDM clock standard takes effect only after you reboot

the router with the new configuration file. Any change to the timeslot partition

also requires that you save your configuration and reboot. To save time, you

may want to be sure you have configured both the TDM clock standard and the

timeslot partition before you save your configuration and reboot.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

Keine Kommentare

Avaya Configuring TDM Services Bedienungsanleitung Seite 34