Avaya Configuring TDM Services Bedienungsanleitung PDF herunterladen (Seite 49)

Site Manager Parameters

309426-14.10 Rev 01

A-3

Dual Synchronous PMC Parameters

The dual synchronous PMC parameters determine the behavior of the TDM

circuit on an individual timeslot basis.

Parameter: Enable

Path: Configuration Manager > Connector > Edit Line

Default: Enable

Options: Enable | Disable

Function: Enables traffic over a TDM circuit.

Instructions: Select Enable to enable traffic over a TDM circuit. Select Disable to disable

traffic over a TDM circuit.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.9.3.5.1.2

Parameter: Per-Timeslot Subrate

Path: Configuration Manager > Connector > Edit Line

Default: Subrate_64K

Options: Subrate_64K | Subrate_56KMSB | Subrate_64KLSB

Function: Specifies data rate for each timeslot within a TDM circuit.

Instructions: Accept the default, 64K, for a full timeslot. Select 56KMSB to send 56 Kb/s

data and set the first bit on the wire and have data carried on the next 7 bits.

Select 56KLSB to send 56 Kb/s data and carry data on the first 7 bits and set the

last bit to 1.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.9.3.5.1.7

Parameter: Number of Timeslots

Path: Configuration Manager > Connector > Edit Line

Default: 1

Options: 1 through 32

Function: Number of TDM circuit timeslots occupied by this interface. Since TDM

circuits are full-duplex, setting this attribute to N will allocate N transmit

timeslots and N receive timeslots.

Instructions: Accept the default or select a value from 1 to 32.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.9.3.5.1.8

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 57 58

Keine Kommentare

Avaya Configuring TDM Services Bedienungsanleitung Seite 49