Avaya Configuring Traffic Filters and Protocol Prioritization Bedienungsanleitung PDF herunterladen (Seite 38)

Configuring Traffic Filters and Protocol Prioritization

2-4

If there is no trafﬁc in the normal-priority queue, the algorithm proceeds to

Step 5.

4. The router empties all packets from the normal-priority queue, up to the

bandwidth percentage you have conﬁgured, into the transmit queue and

transmits them.

The default bandwidth percentage for the normal-priority queue is 20 percent.

If the actual bandwidth use is less than the limit, the router empties the

normal-priority queue and proceeds to the next queue.

5. The transmit queue scans the low-priority queue.

If there is no trafﬁc in the low-priority queue, the algorithm starts again at

Step 1.

6. The router empties all packets from the low-priority queue, up to the

bandwidth percentage you have conﬁgured, into the transmit queue and

transmits them.

The default bandwidth percentage for the low-priority queue is 10 percent.

If the actual bandwidth use is less than the limit, the router empties the

low-priority queue.

7. The algorithm starts again at Step 1.

Figure 2-2 illustrates the algorithm for bandwidth allocation dequeuing.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 161 162

Keine Kommentare

Avaya Configuring Traffic Filters and Protocol Prioritization Bedienungsanleitung Seite 38