Avaya Using Technician Interface Scripts Bedienungsanleitung PDF herunterladen (Seite 719)

100

101

303560-A Rev 00

2-671

ft1_state

Displays information about the operational state of the FT1/T1 DSU/CSU adapter module.

The display includes the following information:

Slot Slot identifier; always 1 for the ARN.

Conn Connector identifier; ranges from 1 to 2.

Port State State of the port associated with the FT1/T1 line, as follows:

•

Red Alarm

- A red alarm signal, indicating the loss of T1 framing.

•

Yellow Alarm

- A yellow alarm signal from the T1 network

indicating that the remote T1 interface is out-of-frame.

•

Loopback

- Port is in loopback mode.

•

- Port is synchronized with the T1 network.

•

AIS

- A blue alarm signal from the T1 network indicating a total

loss of signal from the remote T1 device.

Loopback State Defines the loopback state of the port, as follows:

• Line Loopback

- Loops received data back onto the T1

transmission path at the point where the T1 interface enters the

FT1/T1 DSU/CSU adapter module.

• Payload Loopback

- Detects and encodes an ANSI Bit-Oriented

Payload Loopback message or an AT&T Payload Loopback

message across the T1 Facility Data Link (FDL). Upon detection

of a Payload Loopback message, the FT1/T1 DSU/CSU adapter

module transmits the received information in the outgoing

direction.

• No Loop -

No loopback is configured on the FT1/T1 DSU/CSU

adapter module.

1 2 ... 714 715 716 717 718 719 720 721 722 723 724 ... 891 892

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Using Technician Interface Scripts Bedienungsanleitung Seite 719

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya Using Technician Interface Scripts