Avaya BCM50 Installationshandbuch PDF herunterladen (Seite 84)

84 Chapter 7 Installing the main unit

NN40020-302

If you install additional units, you can install a second unit on the shelf beside the first unit. You

can install another unit on top of each of the first two units. Nortel recommends a maximum of

four units per rack-mount shelf.

Select your installation option:

• To install the BCM50 unit on the rack-mount shelf on page 84

• To install a BCM50 unit on top of another unit on page 85

To install the BCM50 unit on the rack-mount shelf

1 Place the BCM50 unit on the rack so that the feet of the unit are in the depressions in the shelf.

2 Move the unit forward until the feet touch the front side of the depressions.

3 Slide the unit back until the feet click in place on the slots in the depressions. See the figure

Attach the units to the rack-mount shelf on page 84.

4 To further secure the unit, use the four self-tapping screws (for plastic) supplied with the

rack-mount kit to attach the unit to the rack-mount shelf. Make sure the screw holes in the unit

are aligned with the holes in the rack-mount shelf. Then insert the four screws through the

holes in the bottom of the shelf and into the screw holes in the bottom of the unit.

5 Install the power supply using a method appropriate for your installation. For details about

installation options, see Installing the BCM50 power supply on page 92.

Figure 36 Attach the units to the rack-mount shelf

Caution: Use only the screws supplied with the rack-mount kit (NT9T6325). Do not

replace the screws. Other screws can damage the unit.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 334 335

Keine Kommentare

Avaya BCM50 Installationshandbuch Seite 84