Avaya BCM50 Installationshandbuch PDF herunterladen (Seite 92)

92 Chapter 7 Installing the main unit

NN40020-302

4 If the BCM50 system has additional units, you can install the other units on top of, or beside,

the existing BCM50 unit.

• To install the additional units beside the existing unit, repeat steps 1 to 3 for each unit.

• To install the additional units on top of the existing unit, see the procedure To install a

BCM50 unit on top of another unit on page 85.

5 Install the power supply using a method appropriate for your installation. For details about

installation options, see Installing the BCM50 power supply on page 92.

Installing the BCM50 power supply

There are several different ways to install a power supply. Select the method that works best for

your type of installation. The power supply must be within 1.5 m (5 feet) of the BCM50 unit and

within 1.5 m (5 feet) of the AC power outlet (wall outlet or UPS).

• For a rackmount installation you can install the power supply directly onto the rackmount shelf

or you can use the power supply mounting enclosure.

• For a wallmount installation, you can use the power supply mounting enclosure (for up to three

power supplies) or a single power supply mounting bracket (for a single power supply).

• For a desktop installation, you can mount them directly to the desk or you can use the power

supply mounting enclosure (for up to three power supplies).

To install the power supply on the rack-mount shelf

1 Place the power supply behind the BCM50 units on the back of the rack-mount shelf.

Make sure the power supply is on its side with the label facing the back of the shelf.

2 Use two cable ties to secure the power supply to the rack-mount shelf.

3 Repeat steps 1 and 2 for each power supply you mount.

Note: Do not stack more than one BCM50 unit or power supply mounting enclosure on

top of a first unit.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 334 335

Keine Kommentare

Avaya BCM50 Installationshandbuch Seite 92